Shenpu Industrial

SKF 6308-2RS1

Double-sealed deep-groove ball bearings, pre-greased and maintenance-free, with high load capacity, suitable for medium- and high-speed operation.

Technical specifications

  • Bore d: 40mm
  • OD D: 90mm
  • Width B: 23mm
  • Dynamic load C: 41.0 kN
  • Static load C0: 26.5 kN
  • Limiting speed: 7,500 rpm (grease)
  • Seal type: double rubber seals
  • Material: GCr15 high-carbon chromium bearing steel

Rexroth R185143210 linear ball bearings

Compact linear bearings, low friction and high accuracy, used with linear shafts, suitable for precision positioning.

Technical specifications

  • Model: KWD-025-SNH-C1-G2
  • Shaft diameter: Φ25mm
  • Length: 70mm
  • Dynamic load: 1420 N
  • Static load: 2940 N
  • Motion accuracy: ±0.01mm
  • Seal type: double-end seals
  • Lubrication: lifetime lubrication

SEW FA87 servo planetary gears gear reducers

High-accuracy servo reducers with low backlash, high torsional stiffness, and high transmission efficiency, compatible with Yaskawa and Siemens servo motors.

Technical specifications

  • Reduction ratio: 5:1 - 100:1
  • Rated torque: 150 Nm
  • Backlash: ≤3 arcmin
  • Transmission efficiency: ≥97%
  • Torsional stiffness: 28 Nm/arcmin
  • Input speed: ≤5000 rpm
  • Mounting: flanges/axes input
  • Protection rating: IP65

KTR ROTEX GS28

Jaw-type flexible couplings, for vibration and noise reduction, compensating axial, angular, and radial misalignment, maintenance-free and easy to install.

Technical specifications

  • Size: GS28
  • Rated torque: 140 Nm
  • Maximum speed: 5800 rpm
  • Bore range: Φ14-38mm
  • Axial compensation: ±0.4mm
  • Angular compensation: ±1°
  • Elastomer hardness: 92/98 Shore A
  • Material: aluminum alloy/steel